Prevention & Control: Using back fire to combat wildfire
Thank you for choosing Automatic Translation. Currently we are offering translations from English into French and German, with more translation languages to be added in the near future. Please be aware that these translations are generated by a third party AI software service. While we have found that the translations are mostly correct, they may not be perfect in every case. To ensure the information you read is correct, please refer to the original article in English. If you find an error in a translation which you would like to bring to our attention, it would help us greatly if you let us know. We can correct any text or section, once we are aware of it. Please do not hesitate to contact our webmaster to let us know of any translation errors.
Can fire be combated with fire? Sometimes, counter-fires (back fires) can be lit in a so called Controlled Prescribed Burn to starve a fire of the fuel it needs to spread. But how does the technique actually work?
A back fire is a fire that is deliberately initiated in front of an active fire front, usually a forest fire, grass fire, or some other type of wildfire.
The backfire consumes some of the combustible material and creates a fire belt that the wildfire has difficulty crossing.
At best, the backfire can completely prevent the fire from spreading, but at the same time there is a risk that the counter-fire will spread and may even worsen the wildfire.
Therefore, extensive experience is needed to use the technique, or it can easily get out of hand. The best effect is if the counter-fire is located so close to the fire front that the counter-fire is eventually sucked in back towards the original fire.
This is possible because a large fire sends warm air upwards and therefore constantly draws air.
Prescribed at the correct distance, the backfire will move in the direction of the main fire without spreading elsewhere.
Don´t miss any ctif news - follow link to sign up for our monthly CTIF NewsletteRS
Photo: (Above) An aerial view of a controlled burn in Helderberg Nature Reserve in South Africa bordering the city of Cape Town. In South Africa controlled burns are important for maintaining the ecological health of indigenous fynbos as well as reducing the intensity of future burns.
Cover Photo: Prescribed fire in ponderosa pine forest in eastern Washington (USA) to restore ecosystem health.
Fire prevents fire
In areas where forest fires are common, fire is also used to prevent fires.
This happens by doing controlled burns, which removes so much material that the forest fires can not spread.
However, there are several examples where Prescribed Burns have run out of control.
A controlled or prescribed burn, also known as hazard reduction burning, backfire, swailing, or a burn-off, is a wildfire set intentionally for purposes of forest management, farming, prairie restoration or greenhouse gas abatement, Wikipedia writes:
A controlled burn may also refer to the intentional burning of slash and fuels through burn piles.
Fire is a natural part of both forest and grassland ecology and controlled fire can be a tool for foresters. Hazard reduction or controlled burning is conducted during the cooler months to reduce fuel buildup and decrease the likelihood of serious hotter fires.
Controlled burning stimulates the germination of some desirable forest trees, and reveals soil mineral layers which increases seedling vitality, thus renewing the forest. Some cones, such as those of Lodgepole Pine and Sequoia, are serotinous, as well as many chaparral shrubs, meaning they require heat from fire to open cones to disperse seeds.
In industrialized countries, controlled burning is usually overseen by fire control authorities for regulations and permits.
Controlled burns have a long history in wildland management. Pre-agricultural societies used fire to regulate both plant and animal life. Fire history studies have documented periodic wildland fires ignited by indigenous peoples in North America and Australia.
Fires, both naturally caused and prescribed, were once part of natural landscapes in many areas. Studies have shown that between the mid Holocene and the 17th century AD, wildland fires annually burned between 45.0% and 87.5% of the area burned in California's in a recent decade (1994–2004), for example. These practices ended in the early 20th century when US fire policies were enacted with the goals of suppressing all fires.
Since 1995, the US Forest Service has slowly incorporated burning practices into its forest management policies.
Back burning involves starting small fires along a man-made or natural firebreak in front of a main fire front. Back burning reduces the amount of fuel that's available to the main fire by the time that it reaches the burnt area.
Back burning is utilized in controlled burning and during wildfire events. While controlled burns utilize back burning during planned fire events to create a "black line", back burning or backfiring is also done to stop a wildfire that is already in progress. Firebreaks are also often used as an anchor point to start a line of fires along natural or manmade features such as a river, road or a bulldozed clearing. It is called back burning because the small fires are designed to 'burn back towards the main fire front' and are usually burning and traveling against ground level winds.
Another consideration is the issue of fire prevention.
In Florida, during the drought in 1995, catastrophic wildfires burned numerous homes. But forestry managers in the Florida Division of Forestry noted that the underlying problem was previous cessation of controlled burning, resulting from complaints by homeowners. Each year additional leaf litter and dropped branches increased the likelihood of a hot and uncontrollable fire.
Controlled burns are sometimes ignited using a tool known as the driptorch, which allows a steady stream of flaming fuel to be directed to the ground as needed. Variations on the driptorch can be used such as the helitorch, which is mounted on a helicopter, or other improvised devices such as mounting a driptorch-like device on the side of a vehicle. A pyrotechnic device known as a fusee can be used for ignition in nearby fuels while a Very pistol can be for fuels farther away.
For the burning of slash, waste materials left over from logging, there are several types of controlled burns. Broadcast burning is the burning of scattered slash over a wide area. Pile burning is gathering up the slash into piles before burning. These burning piles may be referred to as bonfires. High temperatures can harm the soil, damaging it physically, chemically or sterilizing it. Broadcast burns tend to have lower temperatures and will not harm the soil as much as pile burning, though steps can be taken to treat the soil after a burn. In lop and scatter burning, slash is left to compact over time, or is compacted with machinery. This produces a lower intensity fire, as long as the slash is not packed too tightly.However, soil may be damaged if machinery is used to compress the slash.
Controlled burning reduces fuels, may improve wildlife habitat, controls competing vegetation, improves short term forage for grazing, improves accessibility, helps control tree disease, and perpetuates fire dependent species. In mature longleaf pine forest, it helps maintain habitat for endangered red-cockaded woodpeckers in their sandhill and flatwoods habitats. Fire is also felt to be a crucial element of the recovery of the threatened Louisiana pine snake in the longleaf pine forests of central Louisiana and eastern Texas. However, many scientists disagree with such a simplistic approach, and indicate that each forest must be assessed on its own merit.
In the wild, many trees depend on fire as a successful way to clear out competition and release their seeds. In particular, the Giant sequoia depends on fire to reproduce: the cones of the tree open after a fire releases their seeds, the fire having cleared all competing vegetation. Due to fire suppression efforts during the early and mid 20th century, low-intensity fires no longer occurred naturally in many groves, and still do not occur in some groves today. The suppression of fires also led to ground fuel build-up and the dense growth which posed the risk of catastrophic wildfires. It wasn't until the 1970s that the National Park Service began systematic fires for the purpose of new seed growth.
In Oregon, field burning has been widely used by grass seed farmers as a method for clearing fields for the next round of planting, as well as revitalizing serotinous grasses that require fire in order to grow seed again. The Oregon Department of Environmental Quality began requiring a permit for farmers to burn their fields in 1981, but the requirements became stricter in 1988 following a multi-car collision in which smoke from field burning near Albany, Oregon, obscured the vision of drivers on Interstate 5, leading to a 23-car collision in which 5 people died and 37 were injured. This resulted in more scrutiny of field burning and proposals to ban field burning in the state altogether.
In the European Union burning crop stubble after harvest is used by farmers for plant health reasons under several restrictions in the cross compliance regulations.
The conflict of controlled burn policy in the United States has roots in the historical campaigns to combat wildfires and to the eventual acceptance of fire as a necessary ecological phenomenon. The notion of fire as a tool had somewhat evolved by the late 1970's as the National Park Service authorized and administered controlled burns.
While the methodology was still relatively emergent the Yellowstone fires of 1988 struck, which significantly politicized fire management. The ensuing media coverage was a spectacle that was vulnerable to misinformation. Reports drastically inflated the scale of the fires which stigmatized politicians in Wyoming, Idaho, and Montana to believe that all fires represented a loss of revenue from tourism.
Partially as a result of millions of dollars lost in estimates, stricter data recording was enforced and thresholds were established for determining which fires must be suppressed.
Paramount to the new action plans is the suppression of fires that threaten the loss of human life with leniency toward areas of historic, scientific, or special ecological interest.
Since 1988, many states have made progress toward controlled burns but with a proclivity toward forgetfulness between fire events. Senators Ron Wyden and Mike Crapo of Oregon and Idaho have been moving to reduce the shifting of capital from fire prevention to fire suppression following the harsh fires of 2017 in both states.
The controlled burning or swailing of heathland is used in the United Kingdom and other countries as a conservation tool. In Scotland it is known as "muirburn". Often it is used as a tool for creating fire breaks to reduce the risk of dangerous outbreaks but is also an important mechanism for preventing succession to woodier vegetation and plays an important role in the life cycle of heather species. Red grouse eat heather shoots and as grouse shooting has long been an expensive sport the landowners need to ensure a good crop of grouse so each year parts of the moor are burned of old heather to cause fresh shoots.
Greenhouse gas reduction
Northern California fire crews start a backfire to stop the Poomacha fire from advancing westward.
Controlled burns on Australian or USAAA savannas can result in an overall reduction of greenhouse gas emissions. One working example is the West Arnhem Fire Management Agreement, started to bring "strategic fire management across 28,000 square kilometres (11,000 sq mi) of Western Arnhem Land" to partially offset greenhouse gas emissions from a liquefied natural gas plant in Darwin, Australia. Deliberately starting controlled burns early in the dry season results in a mosaic of burnt and unburnt country which reduces the area of stronger, late dry season fires.
Also known as "patch burning". To minimise the impact of smoke, burning should be restricted to daylight hours whenever possible.