Meet the Seminar Sponsors: Bullard Thermal Imaging & Safety Gear for Firefighters

Founded in 1898, Bullard is a leading manufacturer of high-quality personal protective equipment and systems that are marketed worldwide.

Product lines include thermal imagers, hard hats, firefighter and rescue helmets, supplied air respirators, powered air-purifying respirators, and air quality equipment.

The video above is a short demonstration during the From Knowledge to Practice Project in Ottawa 2015, where Bullard was one of the main sponsors. The thermal footage shows clearly how sharp these cameras are; at one point during the training sessions, a firefighter held up a newspaper inside a training container, and it was possible to clearly read headlines, intro and dates from the Bullard footage!  A great feature for training purposes is the ability to export this footage in 480p as AVI files.

Video in the middle shows the Bullard juxtaposed with regular video during a live Doll House Burn in Ottawa, November 2015.

Video below shows the Bullard LDX Ultra High Definition Thermal Imager used in a live house burn by Ottawa and Montreal Fire Services, performed in Mirabel, Quebec June 2016.

All three videos shot and edited by Bjorn Ulfsson & Terri Casella, BT Video Productions. Bullard TIC support provided by Manfred Kihn, Bullard´s official training representative in Canada.

Bullard is a fifth-generation family-owned US enterprise whose employees are committed to excellence in every product category.

Thermal Imaging

Since the introduction of its first firefighting thermal imager in 1998, Bullard has captured the lead market position within this industry throughout the world.

Since the introduction of its first firefighting thermal imager in 1998, Bullard has captured the lead market position within this industry throughout the world, with many thousands of units in service. Bullard is the number one choice of firefighters, known widely to offer the greatest durability, the most practical features, the best training resources and the highest level of support available.

Respiratory Protection

Since the Company’s original line of supplied-air respirators were designed for use during the construction of the Golden Gate Bridge, the Bullard line of respiratory protection equipment has expanded to include powered-air purifying respirators, pressure demand systems, breathing air filters and monitors, and a full range of Free-Air® pumps and compressors.

Fire and Rescue Safety

Bullard offers a full line of fire helmets to firefighters and other first responders throughout the world, from traditional fiberglass helmets to the very latest in high-heat advanced thermoplastic helmets.

Founded in 1898, Bullard is a leading manufacturer of high-quality personal protective equipment and systems that are marketed worldwide. Product lines include thermal imagers, hard hats, firefighter and rescue helmets, supplied air respirators, powered air-purifying respirators, and air quality equipment. Bullard is a fifth-generation family-owned enterprise whose employees are committed to excellence in every product category. The Company, headquartered in Cynthiana, Kentucky, is led by CEO Wells Bullard. The Board of Directors has been led by Edward “Jed” Bullard since 1998.

Bullard traces its heritage back to 1898, a time of great opportunity in the western United States. Founded in San Francisco by Edward Dickinson Bullard, the Company originally supplied carbide lamps and other mining equipment to gold and copper miners in California, Nevada and Arizona. When his son, E.W. Bullard, returned from World War I, he combined his understanding of customer needs and his experience with his doughboy army helmet to design a protective headgear for miners. This “Hard Boiled®” hat, introduced in 1919, represented the first of many innovative designs that have led Bullard to its prominent position in head protection for industrial and emergency response applications.

During the 1930s, while the Golden Gate Bridge was being constructed in San Francisco, Bridge engineer Joseph B. Strauss contacted Bullard to request that the Company adapt its hats to protect bridge workers. Bullard not only supplied hard hats for this famous project, but its engineers also designed an original supplied air respirator for workers responsible for blasting the steelwork prior to the application of the Bridge’s International Orange paint. Bullard went on to design innovative supplied-air respiratory protection solutions for such key industries as pharmaceutical manufacturing and automotive refinishing.

Following the development of the hard hat, Bullard engineers designed the Company’s first fire helmet in 1930. The Company quickly became a technology leader in this industry, developing and introducing the first fiberglass fire helmet in 1947, the first NFPA-approved thermoplastic fire helmet in 1983, and a new helmet that incorporated a non-slip ratchet suspension with a knob in the back for simple sizing.

Beginning in 1972, the Company moved its production facilities from Sausalito, California, to Cynthiana, Kentucky, to take advantage of improved transportation costs and an available workforce. Nearly two decades later in 1991, Bullard headquarters also relocated from Sausalito to Cynthiana, creating new synergies between office and manufacturing operations. Since 1994, Bullard has maintained ISO9001 certification, signifying the Company’s ongoing commitment to a rigorous quality system in its manufacturing operations.

Already a recognized leader in the fire safety products market with its line of fire helmets, Bullard introduced its first thermal imager in 1998. This comprehensive product line combines the most advanced thermal imaging technology with Bullard’s expertise in high heat, impact-resistant materials to bring firefighters the most durable and reliable thermal imagers in the world. Over a decade later, Bullard Thermal Imagers continue to be the number one choice of firefighters around the world.

The Company’s key to success is assembling the right blend of people, products and technology, and focusing these resources on customers. From the receptionist and the design engineer to the machine operator and the shipping specialist, every Bullard team member has a genuine appreciation for the customer. As a true team, we work as one to get the job done.

Bullard Products: Best in Class

Durability, comfort, safety, quality and innovation are hallmarks of every Bullard product line. After operating for more than a century, Bullard is committed to excellence in the eyes of our customers, and we are proud that our products are widely known among users to be the “best in class.”

Fire and Rescue Safety

Bullard offers a full line of fire helmets to firefighters and other first responders throughout the world, from traditional fiberglass helmets to the very latest in high-heat advanced thermoplastic helmets. These products are known to provide outstanding head protection, superior comfort, unmatched durability and excellent on-the-job performance. Bullard engineers continually work to incorporate recommendations from leading veteran firefighters, ensuring its products are designed by firefighters, for firefighters.

Thermal Imaging

Since the introduction of its first firefighting thermal imager in 1998, Bullard has captured the lead market position within this industry throughout the world, with many thousands of units in service. Bullard is the number one choice of firefighters, known widely to offer the greatest durability, the most practical features, the best training resources and the highest level of support available.

Respiratory Protection

Since the Company’s original line of supplied-air respirators were designed for use during the construction of the Golden Gate Bridge, the Bullard line of respiratory protection equipment has expanded to include powered-air purifying respirators, pressure demand systems, breathing air filters and monitors, and a full range of Free-Air® pumps and compressors.